Shareware Super Platinum 8

home *** CD-ROM | disk | FTP | other *** search

/ Shareware Super Platinum 8 / Shareware Super Platinum 8.iso / mac / BACKUP / DRVMAP11.ZIP;1 / DRIVEMAP.DOC next >

Wrap

Text File | 1994-06-22 | 28.8 KB | 623 lines

ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ DRIVE MAPPER Copyright (c) 1993-94 Jason Sauve. All Rights Reserved Version 1.10· Revised 6/22/94 ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ *** DRIVEMAP.DOC TABLE OF CONTENTS *** CHAPTER 1 - DRIVE MAPPER INFORMATION System Requirements / Compatibility ...................... Part 1 Program Introduction ..................................... Part 2 CHAPTER 2 - DRIVE INFORMATION WINDOWS Logical Drives ........................................... Part 1 Current Drive ............................................ Part 2 Disk Size ................................................ Part 3 Disk Space ............................................... Part 4 Drives Detected .......................................... Part 5 Total MB ................................................. Part 6 Free MB .................................................. Part 7 CHAPTER 3 - SYSTEM INFORMATION WINDOW Registered User .......................................... Part 1 CPU Type ................................................. Part 2 Video Adapter ............................................ Part 3 DOS Version .............................................. Part 4 Mouse Type, Version ...................................... Part 5 Date / Time .............................................. Part 6 Free XMS ................................................. Part 7 XMS Version .............................................. Part 8 XMM Version .............................................. Part 9 CHAPTER 4 - OPTIONS MENU Exit to DOS [ESC] ........................................ Part 1 Shell to DOS ............................................. Part 2 Re-Scan Drives ........................................... Part 3 Registration ............................................. Part 4 Color Setup .............................................. Part 5 File Commands ............................................ Part 6 CHAPTER 5 - TROUBLE SHOOTING Exit Codes / Error Levels ................................ Part 1 Overlay Error Messages ................................... Part 2 DOS Shell Error Messages ................................. Part 3 CHAPTER 1 PART 1 - System Requirements ___________________________________________________________________ System Requirements ___________________________________________________________________ Drive Mapper requires: - 286+ processor - 100k free conventional memory - 500k free XMS memory - Microsoft compatible mouse driver - MS-DOS 5.0 or greater - 287+ Math Co-Processor but EMULATION is supported. Recommendations: - 386+ processor Compatibility: Drive Mapper has been tested to function properly with the following: User comments on compatibility appreciated. CPU's: Intel 386s Intel 486s Ambra 386s IBM 386s Graphics Cards: ATI VGA Wonder ATI MACH32 VLB (2 Mb RAM) ATI MACH64 VLB (4 Mb RAM) Operating Systems: MS-DOS 5.0 MS-DOS 6.0 MS-DOS 6.2 MS-DOS 6.22 MicroSoft Windows 3.10 (Full Screen) MicroSoft Windows For Workgroups 3.11 (Full Screen) Memory Managers: EMM 386 QEMM 7.02 QEMM 7.04 ___________________________________________________________________ General Program Outline ___________________________________________________________________ Drive Mapper is a hard drive utility that will show you how many hard drives you have, the total megs and the total free megs of all the computers logical drives. Drive Mapper will also let the user select an individual drive and view the disk size, and free disk space of the selected drive in Megs. In addition Drive Mapper also includes a window for displaying a variety of your system information. Click on the buttons ( [˛] ) in the Options window to choose one of the following: - Exiting to DOS - Shelling to DOS - Re-Scanning all the hard drives for the most recent stats - Self-registration routine - Built in color configuration procedure. - File commands menu soon to be completed in a future release. CHAPTER 1 PART 2 - Program Introduction ___________________________________________________________________ Drive Mapper Loading Procedures (UNREGISTERED ONLY) ___________________________________________________________________ If you have an unregistered copy of Drive Mapper, you will see the following screen when you first load Drive Mapper. You will have to live with the 10 second delay at the beginning of the program. Since this is an unwanted FEATURE that's why it's included with the UNREGISTERED version of Drive Mapper. You can enjoy watching the timer count down though the delay process. No information will be shown yet until the delay process is complete. …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕ Drive Mapper Version 1.10· ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±…ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª±±±∫ ∫±∫ Unregistered Version [Pause 10 Seconds] ∫±±±∫ ∫±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±…ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕ Drive Info ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª±±±…ÕÕÕ Global Drive Info ÕÕª±±±∫ ∫±∫ Valid Drives : ∫±±±∫ Drives Detected : ∫±±±∫ ∫±∫ Current Drive : ∫±±±∫ ∫±±±∫ ∫±∫ Disk Size : ∫±±±∫ Total MB : ∫±±±∫ ∫±∫ Free Disk Space : ∫±±±∫ Free MB : ∫±±±∫ ∫±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±…ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕ System Info ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª±±±…ÕÕÕÕÕÕÕÕ Options ÕÕÕÕÕÕÕª±±±∫ ∫±∫ Registered User : UNREGISTERED ∫±±±∫ [˛] Exit to DOS [ESC] ∫±±±∫ ∫±∫ CPU Detected : Free XMS : ∫±±±∫ [˛] Shell to DOS ∫±±±∫ ∫±∫ Video Adapter : XMS Ver. : ∫±±±∫ [˛] Re-Scan Drives ∫±±±∫ ∫±∫ DOS Version : XMM Ver. : ∫±±±∫ [˛] Registration ∫±±±∫ ∫±∫ Mouse Type, Ver.: ∫±±±∫ [˛] Color Setup ∫±±±∫ ∫±∫ Date / Time : ∫±±±∫ [˛] File Commands ∫±±±∫ ∫±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ »ÕÕÕÕÕÕÕÕÕ Copyright (c) 1993-94 by Jason Sauve, All Rights Reserved. ÕÕÕÕÕÕÕÕÕº ___________________________________________________________________ Drive Mapper Main Window (Registered & Unregistered) ___________________________________________________________________ Welcome to the Drive Mapper main application, here you will see an array of information and options to chose from. Have a look at the preview below, documentation follows. …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕ Drive Mapper Version 1.10· ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±…ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª±±±∫ ∫±∫ Unregistered Shareware Version - Please Register ∫±±±∫ ∫±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±…ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕ Drive Info ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª±±±…ÕÕÕ Global Drive Info ÕÕª±±±∫ ∫±∫ Valid Drives : ABCDEFG ∫±±±∫ Drives Detected : 7 ∫±±±∫ ∫±∫ Current Drive : C ∫±±±∫ ∫±±±∫ ∫±∫ Disk Size : 270.48 Mb ∫±±±∫ Total MB : 1309.64 Mb ∫±±±∫ ∫±∫ Free Disk Space : 28.67 Mb ∫±±±∫ Free MB : 381.94 Mb ∫±±±∫ ∫±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ ∫±…ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕ System Info ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª±±±…ÕÕÕÕÕÕÕÕ Options ÕÕÕÕÕÕÕª±±±∫ ∫±∫ Registered User : UNREGISTERED ∫±±±∫ [˛] Exit to DOS [ESC] ∫±±±∫ ∫±∫ CPU Detected : 80486 Free XMS : 12800 ∫±±±∫ [˛] Shell to DOS ∫±±±∫ ∫±∫ Video Adapter : VGA XMS Ver. : 3.0 ∫±±±∫ [˛] Re-Scan Drives ∫±±±∫ ∫±∫ DOS Version : 6.22 XMM Ver. : 7.04 ∫±±±∫ [˛] Registration ∫±±±∫ ∫±∫ Mouse Type, Ver.: Serial, 8.20 ∫±±±∫ [˛] Color Setup ∫±±±∫ ∫±∫ Date / Time : 6-22-1994 11:54 AM ∫±±±∫ [˛] File Commands ∫±±±∫ ∫±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±»ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº±±±∫ ∫±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±∫ »ÕÕÕÕÕÕÕÕÕ Copyright (c) 1993-94 by Jason Sauve, All Rights Reserved. ÕÕÕÕÕÕÕÕÕº CHAPTER 2. DRIVE INFORMATION MENU Part 1 - Logical Drives Logical Drives will show you all the letter(s) of the hard drives, floppy drives, CD-ROM drives, RAM drives & other DOS compatible drives that have been installed on your system, if you have 2 physical hard drives partitioned into 3 logical drives, then it will be displayed as the drives appear under DOS. Thus "ABCDE" would be displayed. If you are running a CD-ROM drive and have DOS's MSCDEX installed & setup so that you CD-ROM drive letter was "H" then the following would be displayed "ABCDEH" (without the quotes). With the drive letter(s) you can click the mouse on any drive letter listed in by Logical Drives. From here you will be able to get additional or different information on the drive that you have selected as follows below in the next part(s). Part 2 - Current Drive Current Drive shows the drive that was selected in the list of Logical Drives Part 3 - Disk Size Disk Size will show you the current size of your hard drive that you selected from the list of Logical Drives. The total hard drive space is read in Megs or MegaBytes, which is what the M represents beside the value shown in the Disk Size view. One Meg equals 1,000,000 bytes. To calculate the number of bytes simply calculate the value shown by a million. All Disk sizes & space are divided by 1 million instead of 1,048,576 which most programs use. Part 4 - Disk Space Disk Space will show the total number of megs remaining on the logical drive currently selected, shown in the Logical Drive list. Part 5 - Drives Detected The Drives detected view will display the number of logical drives that Drive Mapper detected on your computer. Part 6 - Total MB Total MB (Megabytes) will display the total number of megs throughout all your logical drives, excluding floppy drives. If you have 2 hard drives, one 345M and one 425M then the value shown in the Total MB view will be 770 Mb. Part 7 - Free MB Free MB will sum up the megs free on each of your logical drives (excluding floppy drives) and display how many megs currently remain on all your logical drives. CHAPTER 3. SYSTEM INFORMATION WINDOW Part 1 - REGISTERED USER This displays the name of the registered user, if Drive Mapper was unpaid for then it will show "UNREGISTERED", if you have not paid for a registered copy of Drive Mapper and this window shows other than "UNREGISTERED" please contact the author immediately. Part 2 - CPU TYPE Drive Mapper will automatically detect the cpu type your running it on, Drive Mapper supports 80286, 80386, 80486 processors. Drive Mapper itself can be run on the Pentium processor, but the results of the CPU TYPE when run on the Pentium's are unknown. Part 3 - VIDEO ADAPTER Video Adapter will display the detected graphics mode supported by your computer and display it in the view beside. Part 4 - DOS VERSION The DOS VERSION will display the current operating system version number, this has not been tested under OS/2, but works under MS-WINDOWS 3.x. Part 5 - MOUSE TYPE, VERSION The mouse type (BUS, Serial, etc) & the mouse driver version will be displayed in this view. Part 6 - DATE / TIME The current system date & time is displayed & updated in this view. Part 7 - Free XMS The systems free XMS memory is displayed in this view. Part 8 - XMS Version Your systems extended memory version is displayed in this view. Part 9 - XMM Version Your systems extended memory manager version will be displayed in this view, for DOS 6.X it will most likely be 3.1 and for QEMM Version 7.2 your XMM Version will be 7.2 and the same pattern follows for QEMM Version 7.4 & on. CHAPTER 4 - OPTIONS Part 1 - Exit to DOS This option, if selected will exit Drive Mapper and return you to the DOS prompt. You must click on the [˛] area of the menu inside the square brackets, this applies for all other options. If you have an UNREGISTERED version of Drive Mapper, you will see the following Once again you have to live with the unwanted delay feature since the copy of Drive Mapper is UNREGISTERED. If you have a registered copy of Drive Mapper, you will only see the Copyright notice and none of the text following it, nor the 10 second delay that follows after the registration notices. Drive Mapper Version 1.10· Copyright (c) 1993-94 by Jason Sauve, All Rights Reserved. Portions Copyright (c) 1983,92 Borland International Inc. For a REGISTERED copy of Drive Mapper Version 1.10·: Read the REGISTER.FRM file for additional information. Make orders for $35 CDN / $28 US (S&H not included) PAYABLE TO: Jason Sauve 1787 Argus LaSalle, Ont. N9J 3G4 Canada Thank You For Your Support ... [Pause 10 Seconds] Part 2 - Shell to DOS If this option is selected then Drive Mapper will run a copy of the COMMAND.COM if it is located and bring you to a temporary DOS prompt. Here you can copy files, run other applications, etc. Type EXIT to return to Drive Mapper at the prompt. Part 3 - Re-Scan Drives This option will re-scan all your hard drives and display the most recent information in the corresponding windows. You will not see any significan change with this option under the Drive Information menu unless you've been in the DOS shell or you are multi-tasking under a program such as DesqView, OS/2 or MicroSoft Windows 3.x. Part 4 - Registration If you've completed and sent in your registration form (REGISTER.FRM) file to the author you can run this option very easily, select the ˛ button, here you will be prompted to enter your name. NOTE: The name you enter MUST CORRESPOND to the name that you entered on the REGISTER.FRM file, it corresponds to the blank where it asks: "Name you wish to be registered to", no need to fear though, if you don't remember the name you put to registere the program with it will be on one of the documents either FAX'ed, sent by mail, or a voice call to you with the name you wanted to register the program to and your authentic registration number. Part 5 - Color Setup If you select this option, the screen will clear and display a few rows of multi-colored lines of text with differnt backgrounds. SAMPLE 1: Color 11 Bk 5 SAMPLE 2: Color 1 Bk 0 The following is a list of color options that you will be presented with and their default values: Generic Window Color (Ÿ = 1) : Message Window Color (Ÿ = 4) : Generic Window Border Color (Ÿ = 7) : Message Window Border Color (Ÿ = 15) : Generic Window Title Color (Ÿ = 14) : Message Window Title Color (Ÿ = 14) : Window Field Separator Color (:) (Ÿ = 7) : Drive & GD Info Headings Color (Ÿ = 11) : Valid Drives Color (Ÿ = 15) : Current Drive Field Color (Ÿ = 12) : Disk Size & Free Space Field Color (Ÿ = 3) : GD Info Window Field Colors (Ÿ = 3) : Mega byte Indicator (Mb) Color (Ÿ = 14) : System Info Headings Color (Ÿ = 15) : System Info Fields Color (Ÿ = 10) : Date / Time Display Color (Ÿ = 14) : Window Options Color (Ÿ = 15) : Window Options Buttons Color (Ÿ = 8) : You MUST restart Drive Mapper for color changes to take affect. Press Ÿ to return to Drive Mapper. Observe the color samples provided at the top of your screen. Fore 1 would mean foreground color 1, and Bk 3 is background color 3. Enter a color value for each option, if you want to use the default color scheme from a different previous one simply press enter throughout all the color prompts. Drive Mapper will create a file called "DRIVEMAP.CFG", this file will store the colors you have picked for each color option in the program. If you messed up on one of the colors, you can easily edit the "DRIVEMAP.CFG" color configuration file with a text editor. If you've changed the color defaults and restarted Drive Mapper with your new color selections and you find it hard to see anything because of the color schemes you chose, then you can press ESC to exit back to DOS or click on the Exit to DOS button in the Options menu. If your not satisfied with your color configuration file at all, it's easiest to delete it and create a new one from the Drive Mapper program. NOTE: Your color configurations DO NOT take affect until you restart Drive Mapper. Part 6 - File Commands The File Commands interface is not yet complete for this version of Drive Mapper 1.10·, look forward to it in an upcoming release of Drive Mapper. It will include a "Mini-DOS Shell" where a variety of functions can be performed. CHAPTER 5 - TROUBLE SHOOTING Part 1 - EXIT CODES Drive Mapper will return one of the following exit codes when it either halts execution or is exited normally. Drive Mapper can and may also produce accumulative exit codes / error levels when exiting to DOS. For example not enough XMS memory was found for Drive Mapper to run and no mouse was detected, both the exit codes are added & you are returned to DOS with an error level of 5. EXIT CODE MEANING 0 Exit sucessful / Drive Mapper is REGISTERED 1 DOS 5.00 or GREATER was not detected 2 Mouse driver was not detected 3 Not enough XMS memory (Refer to Drive Mapper Requirements) 255 Exit sucessful / Drive Mapper is UNREGISTERED Part 2 - OVERLAY ERROR MESSAGES Drive Mapper will display an overlay error and quit to DOS when you get one of the following messages. a) Insufficient EMS memory If you get this message chances are you don't have an expanded memory manager installed. To recover from this, modify or add the following lines if they do not exist in your CONFIG.SYS file using the DOS editor. DEVICE=C:\DOS\HIMEM.SYS DOS=HIGH, UMB DEVICE=C:\DOS\EMM386.EXE 1024 RAM b) EMS driver not loaded If you get this message then you have not configured your expanded memory properly, follow the error message procedure in Part 2a). c) Error reading .OVR (overlay) file If this message is displayed, then chances are the Drive Mapper overlay file has been tampered with or damaged by lost sectors, etc on your hard drive, the best thing to do is obtain another copy of Drive Mapper d) Not enough memory If this error mesage occurs then your system does not have enough conventional memory to run Drive Mapper, to solve this problem, the best thing to do is to remove unwanted TSRs (Terminate and Stay Resident) programs from your CONFIG.SYS and AUTOEXEC.BAT file. e) Overlay file not found If this error messages occurs make sure that you are in the correct path where you installed all the Drive Mapper files, if the DRIVEMAP.EXE file exists but not the DRIVEMAP.OVR file, the program will not execute. Obtain another copy of Drive Mapper. f) Nonspecific error There isn't much help for this type of error, if it occurs then there is most likely a problem with your computer or the way it is configured. The program may have been "hacked" and would cause it not to run. PART 3 - DOS SHELL ERROR MESSAGES If at all you try running the DOS shell and you get one of the following error messages do the following procedure corresponding with the error message you get on your screen. a) File not found your COMMAND.COM file was not found used for the temporary DOS shell, make sure it exists in either your \DOS or root directory. b) Path not found The path to your COMMAND.COM file was not found, follow Part 3 #A c) Access Denied If this error messages occurs, then it may be because you are trying to run Drive Mapper from a network, Drive Mapper is already running or the file was locked. d) Invalid Handle No help available. e) Not enough memory If you get this message then you can try to free up your computers conventional memory by removing unwanted TSRs from your CONFIG.SYS and AUTOEXEC.BAT files f) Invalid environment The environment table in your computers memory is corrupted, try restarting your computer and running Drive Mapper again. g) Invalid format The COMMAND.COM file Drive Mapper was trying to read was of another file format. Possible tampering with the COMMAND.COM file. h) No more files If you get this message, this means DOS already has the maximum number of files open for use. To increase this, close as many applications as possible that you may have running (if multi- tasking), and modify or add the following line to your CONFIG.SYS file. FILES=50 ___________________________________________________________________ Registration ___________________________________________________________________ This program is not free! You are hereby entitled to use this program only for a trial period of 30 days. If you decide that you would like to register Drive Mapper you must complete the registration form (REGISTER.FRM) and return it to the author with the required information and registration fee enclosed. Registration removes the "UNREGISTERED" messages as well as all time delays and excess screen registration messages. Please feel free to distribute the UNREGISTERED Drive Mapper to your friends and local BBS's as long as all of the files in this archive remain included and unmodified. No one hereby obtains the right to DECOMPILE, MODIFY, OR VIEW the files in this archive except the author himself. Doing so VIOLATES all Copyright Laws. This includes the following files listed in the FILELIST.DOC file ___________________________________________________________________ Agreement for Shareware distributors ___________________________________________________________________ Shareware distributors may distribute this program free of charge, the "per disk" charge may not exceed $5 and the shareware distributor will not change the above registration fee and or modify the files contained in this package for the local/remote end user of Drive Mapper. End users are not exempt from registering Drive Mapper with the author at the normal registration fee. ___________________________________________________________________ Technical Support ___________________________________________________________________ Drive Mapper was written by Jason Sauve. Technical support is limited at this time, a special bulletin board may be setup in the near future to answer your questions or to obtain the latest version of Drive Mapper & other products. This depends upon the response for the registration of this product. For other technical questions you can contact the author by writing to the below address. This is a the first official release of Drive Mapper Version 1.10·, however, beta testers are welcome for testing of this program and all comments/complaints and possible suggestions are also welcome for further development of this software application. No one person is hereby "appointed" or "registered" a beta tester unless written consent of the author and the "Disclaimer" is effective to ALL users. Submit all information you may have to the follwing address if you wish to be a tester for this program, including your Name, Phone Number and Address. If you submit good applications that provide useful for this program such as source code that you've made sure works (Turbo Pascal 6.0 / Borland Pascal 7.0 LANGUAGE ONLY) you may even become a registered user of Drive Mapper FREE!. For any other questions, comments or suggestions concerning this software application write to the below address: Jason Sauve 1787 Argus LaSalle, ONT N9J 3G4 CANADA ___________________________________________________________________ Trademarks ___________________________________________________________________ Portions Copyright (c) 1983,1992 Borland International Inc. IBM is a registered trademark of International Business Machines Inc. DOS is a registered trademark of MicroSoft Corp., Inc. MicroSoft is a registered trademark of MicroSoft Corp., Inc. Borland is a registered trademark of Borland International Inc. ___________________________________________________________________ Disclaimer ___________________________________________________________________ IN NO EVENT WILL I BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR INABILITY TO USE THE PROGRAM, OR FOR ANY CLAIM BY ANY OTHER PARTY.